This filling machine can be used to fill 3 gallon,5 gallon (18.9 liter) and other size bucket . At present, we can providing the capacity of 150 bottles /hour、300 bottles /hour、450 bottles /hour、600 bottles /hour and 900 bottles /hour～2000 bottles /hour. The whole line is constituted by: automatic cap remover, brush external bottle washer , automatic bottle feeding machine, bucket conveyor, automatic bucket washing-filling-capping machine, automatic cap uploader, online cap sterilizer,light checker, automatic film packing machine , automatic shrink wrapping machine, ink jet printer, automatic Pail packing machine and stacker crane.

The reclaimed empty barrel generally comes from different environments, such as schools, construction sites, office buildings and so on. the degree of pollution is not the same, we need to clean the empty bucket before filling the water. The empty barrels will be deliveryed by conveyor. Then it will go into the cap remover. It will start to work when the signal is received. After that, we will use wind power system to delivery the empty barrel and recovery the caps.

Cean the outside body of 5 gallon bottles with brush and water.

To load the empty bottles full-automatically into the Internal Bottle Washer/ Disinfecter.

The process: 1. Heat disinfection liquid spray washing and dry, 2.normal temperature Low concentration disinfectant spray washing and dry.3. Two way water jet washing and dry 4. Pure water washing and dry. In the process, the outside of the barrel is also sprayed with the injection head, and all the injection heads are lifted up through the lifting device, deep into the empty barrel, and thoroughly disinfected and sprayed inside the barrel. The empty barrel is cleaned into the filling position through the automatic barrel device, and the overflow water is returned to the pure water tank to avoid the waste of the finished water. In the end. Capping After filling.

caps will be sent to Sorting device by automatic cap elevator, there will be a Photoelectric detecting device. It will work when lack caps and also stop automatically. In the process, the lid is sequentially disinfected, liquid sprayed, flushed with water, finished product water is washed, air dried and then entered the in turn, waiting for the cover to be hung. Compared with the traditional disinfection method, the utility model has the advantages of labor saving, high automation, avoiding the two contact between the cover and the air, and effectively improving the quality of the bottled water products.

To check whether the bottled water has impurities. And keep high quality of your water products.

This plant can film the bucket automatically. It can help replace manual. Normally it will be used in the big capacity.

It producing the steam by electric heating. Then use the high temperature to shrink wrapping.

The barrel is automatically lifted, so that the barrel is suspended, and the bag is manually sheathed on the surface of the barrel.

Automatic arrangement of finished bottled water products, in accordance with established procedures to pile up bottled water, greatly reducing human resources.